3D Printing Stack Exchange
3D Printing Stack Exchange

Questions tagged [microsd]

Use this tag for questions regarding MicroSD card operation

Please refer to , MicroSD is different with respect to the physical card size. Often SD adapters are available to use MicroSD cards in a large SD card readers.

18 questions
9
votes
2 answers

How to format an SD card for Monoprice Select Mini V2?

I bought a 32 GB SDHC (Sandisk) I'd like to use for my Monoprice 3D printer. I have downloaded Partition Wizard and partitioned a 2GB primary partition formatted as FAT and it still does not show any files. What am I doing wrong?
Erik Blomberg
  • 91
  • 1
  • 1
  • 2
7
votes
3 answers

What is the largest microSD card that a Monoprice Select Mini can read?

I have a Monoprice Select Mini v2 and it came with a 256 MB SD card. I have a bunch of 16 GB cards. I have made sure that the new SD card has a FAT32 filesystem. I copy the gcode file onto this card and when I put it in the printer, it can't find…
NomadMaker
  • 293
  • 1
  • 2
  • 6
5
votes
2 answers

How to heat up a Printrbot's hotend using an SD card

My Printrbot simple metal's extruder is jammed and I need to heat it up to unjam it. Unfortunately, the printer does't want to connect to my laptop regardless of the program I'm using (Repetier-Host or Cura 15). Is there a way to use a micro SD…
Brendan Smith
  • 305
  • 1
  • 2
  • 6
4
votes
1 answer

How to sort G-code on SD card based on material (ABS|PLA|SBS)?

I have various G-code files stored at SDCard attached to my Prusa i3 MK2S printer. They are either for ABS, PLA or SBS. The more files I had on the SD card, the more I was running into trouble of finding for which material is which G-code. To…
rudolf_franek
  • 327
  • 1
  • 3
  • 8
4
votes
1 answer

Plug sdramps module and Anet A8 LCD together into RAMPS smart adapter

I want to upgrade my Anet A8's motherboard (the stock one is broken anyway, see: Anet A8 reading 739°C from the extruder thermistor!) to the RAMPS 1.4, without having to get a new LCD/microSD module. I am thinking of getting both a smart adapter and…
Tooniis
  • 331
  • 3
  • 15
4
votes
5 answers

Ender 3 v2 won't read or recognize any SD cards

I've just received my Ender 3v2 and tried multiple SD cards, all have been formatted to FAT32 with no luck. Under the Print selection, all I get is the back button. I looked and I have the V4.2.2 and the firmware is up to date, Showing 1.0.2 unless…
Diabetic Max
  • 41
  • 1
  • 1
  • 2
3
votes
1 answer

Creality Ender-3 V2 Not Doing Anything (Hard to Explain)

I’ve recently obtained a Creality Ender-3 V2 3D printer and have tried setting it up. With it came 2 modifications (CR Touch auto bed leveling kit and dual Z-axis kit). The installation of the dual Z-axis kit was fine, and so was the CR Touch.…
powbrick
  • 81
  • 1
  • 5
3
votes
1 answer

"print" menu not loading on Monoprice MP Select Mini V2

I have an MP Select Mini V2 and when I turn on the printer and select the "print" menu it hangs while saying "please wait" instead of listing the .gcode files stored on the SD card. I have been using that printer with that SD card for hundreds of…
Aubreal
  • 161
  • 5
2
votes
1 answer

Can I re-flash the mainboard on my CR-5 Pro using the USB port instead of the microsd card?

I've had a lot of difficulty with my CR-5 Pro not reading the micro SD card. I was up and running but got the "blue screen" yesterday and re-flashed the main board using instructions I found on YouTube. But the software version showing up now is…
Desertgeek
  • 81
  • 1
  • 5
2
votes
2 answers

Ender 3 Pro not reading new G-code files on original SD Card

I´ve been using my Ender 3 Pro for almost 1 year now. Always using the provided SD card. For a couple of days, the printed does not read any new file that I load to the SD card, but it does with the older files (and it then prints correctly as…
Federico Ponzio
  • 21
  • 1
  • 2
1
vote
1 answer

Does a Creality Ender 3 V2 running mriscoc firmware require a micro SD card at all?

To my understanding, all settings including those that resulted from the Nozzle Auto MPC tuning and Bed PID tuning and the created UBL mesh are all stored I the EEPROM by the mriscoc Marlin firmware on a Creality Ender 3 V2. I'm asking because I…
Bob Ortiz
  • 1,053
  • 1
  • 3
  • 29
1
vote
1 answer

SD cards get corrupted

I have an Ender 3 Pro 3D printer and a few months back I got a blue screen after printing something. I didn't even try to fix it because I got tired of running into problems. Now I opened it again and everything seemed to work. I tried to open the…
George Munteanu
  • 11
  • 1
  • 2
1
vote
1 answer

Format SD Card on Mac to update LCD screen on CR-10S Pro

I want to update the LCD screen on my CR-10S Pro. I've been following the procedure on Teaching Tech and formatting the SD card to FAT32, but the screen either shows the loading screen as normal or doesn't transfer anything. How can I update the…
Bamboo
  • 121
  • 3
1
vote
0 answers

Print from card not showing on new SKR mini e3 v1.2 card

I am a newbie with a 3 months old Ender 3 Pro, my first one. I purchased, installed and loaded a new SKR Mini E3 V1.2 mobo. The LCD panel lit up as usual without problems. I selected 'print from card' which showed the micro SD card had 2 files,…
Denzil Cypret
  • 11
  • 2
0
votes
1 answer

What is the maximum size, read and write speed for micro SD cards on a Creality V4.2.2 board?

What is the maximum read and write speed for micro SD cards that the Creality Ender 3 V2 board V4.2.2 can theoretically handle and what is the maximum SD card size in gigabytes? Micro SD cards have several ratings such as V10, V30, V60 and V90 which…
Bob Ortiz
  • 1,053
  • 1
  • 3
  • 29
1
2