3D Printing Stack Exchange
3D Printing Stack Exchange

Questions tagged [dremel-3d45]

13 questions
5
votes
1 answer

Same parameters lead to very different results

This summer I bought a white PLA+ filament from Sunlu. After some trials, I found these settings in Ultimaker Cura for my Dremel 3D45: The layer thickness is 0.2 mm. The objects were printed almost perfectly for my needs: Now, after 3 months, I…
Mark
  • 417
  • 2
  • 13
4
votes
1 answer

What could have caused this damage?

My Dremel 3D45 stopped the extrusion. I removed the nozzle thinking about it was clogged. But still it didn't solve. Also the nozzle was harder to remove than usual. So I removed the bottom cover and I found this: It seems the heater is completely…
Mark
  • 417
  • 2
  • 13
2
votes
0 answers

ABS does not stick AFTER some good layers

Usually I had problems with the adhesion of the first layers, and most questions here and out there are about this issue. Instead now I'm facing another problem. After "some" (few or even after 10h) suddenly the filament does not stick anymore to…
Mark
  • 417
  • 2
  • 13
2
votes
1 answer

How to fix these issues with Nylon?

I'm using Ultimaker Cura and a Dremel 3D45S with an eSun Nylon filament. As starting point I'm using the default settings of the printer, 260 °C for the hotend and 80 °C for the bed. These are the results: In addition to the poor print quality,…
Mark
  • 417
  • 2
  • 13
2
votes
2 answers

Under-extrusion halfway into print - Dremel 3D45 -PETG

NEW UPDATE BELOW I am having trouble finding the cause for this under-extrusion at start/end of each layer. Something changes halfway into the print creating a visible seam at some specific layer height. This also creates dimensional inaccuracy…
rosi97
  • 121
  • 3
1
vote
1 answer

Why Cura cannot slice this object?

I drew this object by myself using Blender: Importing the STL in Cura v5.3.1 under Ubuntu 23.10 I'm able to slice it for a Sovol SV04 printer, but if I select the Dremel 3D45 printer it fails: I don't see any "red" spot on the model that would…
Mark
  • 417
  • 2
  • 13
1
vote
0 answers

How to connect Dremel 3D45 to a hidden WiFi network?

At office we have a hidden WiFi network. I'm not able to connect our Dremel 3D45 to this network, since when you tap on "WiFi" it scans for the available networks and it does not add the "Hidden network" item as usual. I also tried to make the…
Mark
  • 417
  • 2
  • 13
1
vote
0 answers

Why Cura refuse to slice this object?

I downloaded this SpaceNavErgoStand_for Space Navigator NB USB from Thingiverse. But Cura 5.3.1 refuses to slice it: I'm aware I can file a bug report, but before I'm kindly asking here if there is something obvious I missed. Of course, I tried to…
Mark
  • 417
  • 2
  • 13
1
vote
1 answer

How to improve flat, large areas over supports

I have a similar issue like this one. I'm using Cura 5.3.1, a Dremel 3D45 and PLA+ by eSun. The printings are almost perfect and repeatable. The only issue is about flat and large areas over supports. Like the user of the linked question, I have no…
Mark
  • 417
  • 2
  • 13
1
vote
1 answer

eSun Silk Rainbow PLA leads to nozzle clogging

I use eSUN (Silk) PLA filament daily and I've never had an issue. I use the parameters suggested by the manufacturer: nozzle temperature: 210 °C bed temperature: 60 °C (with purple glue) The extrusions are perfects (the printing itself may be…
Mark
  • 417
  • 2
  • 13
1
vote
1 answer

Why raft is printed much better than the actual first layer?

I'm facing a weird problem I cannot understand why it happens. Most of my objects have a large planar base so I don't have any adhesion issue. I'm using a PLA Silk gold filament from eSun (filament dryer is on while printing) and a Dremel 3D45…
Mark
  • 417
  • 2
  • 13
1
vote
0 answers

Dremel 3D45 does not honor temperature settings

I set: G-code override: false filament: PETG nozzle temperature: 245 °C Here the pictures that state the above points: When loading the model, it also confirms the nozzle temperature of 245 °C: But when running, it uses another temperature…
Mark
  • 417
  • 2
  • 13
0
votes
3 answers

No way to stick PETG on buildplate

I did my homework reading similar questions, like this, this and this. Here a video that shows the issue: The filament is PETG from JAYO and the printer is a Dremel 3D45. As you can see, the filament does not stick on the buildplate. The…
Mark
  • 417
  • 2
  • 13