3

I'm fairly good at sharpening graphite pencils with a knife using the technique in the answer in What is the proper way to sharpen a pencil?

But I'm always breaking the points when I try to sharpen charcoal pencils.

How do I expose the charcoal from the wood when sharpening with a knife without breaking it?

What techniques can I use to sharpen charcoal pencils without breaking the points?

fixer1234
  • 11,490
  • 2
  • 15
  • 48
empty
  • 442
  • 3
  • 12
  • Do you get the same problem when you use a fresh blade? How much of the tip is breaking off? (A simple diagram of picture would really help) –  Sep 06 '17 at 14:24
  • @CreationEdge the points break where the point meets the wood. – empty Sep 06 '17 at 17:08

1 Answers1

3

Sandpaper.

Really, IMHO the best way to sharpen charcoal pencils is by using sandpaper (100 grit). Works really, really well and the result is perfect.

I start by just rough-shaping it slowly and with a lot of caution with a good sharpener. I usually keep a very small layer of wood over the tip and then move the pencil over the sandpaper which I place on a blanket on my desk. I remove the last little bit of wood like that.

This is demonstrated in this video: https://www.youtube.com/watch?v=Df6L-2sB9Ow

fixer1234
  • 11,490
  • 2
  • 15
  • 48
Tony Delaney
  • 196
  • 1
  • 3
  • How to release the point from the wood when sharpening with a knife without breaking it? – empty Aug 31 '17 at 16:24
  • Well, I am just doing it slowly and with a lot of caution with a good sharpener. And I usually keep a very small layer of wood over the tip and then move the pencil over the sandpaper which I place on a blanket on my desk. And remove the last little bit of wood like that.

    Take a look at this video: https://www.youtube.com/watch?v=Df6L-2sB9Ow

     – Tony Delaney Aug 31 '17 at 18:04
  • 2
    @kevin - you would expose the charcoal amount you want shaving off the outer wood with the knife, then shape the point how you like with the sand paper. – rebusB Oct 22 '19 at 21:59