A WD My Passport hard drive (bought in 2016-7) can be detected by one Macbook (a 2018 15" MacBook Pro) but not another (not even in diskutil) (a 2013 11" Macbook Air). What is the explanation for this? Has it got to do with something along the lines of differences in design in the motherboard (eg. different voltage ranges for logic levels)
Asked
Active
Viewed 171 times
3
-
What is the version of macOS running on each one of the MacBooks? – Nimesh Neema Jun 01 '19 at 08:51
-
I would tend to think that there is a (hardware) issue with one (or more) of these devices. The drive could have a controller that is just enough out of spec that the older Mac doesn't like it. Do you have access to and the ability to try the drive itself in another enclosure? – Steve Chambers Jun 01 '19 at 10:57
-
Can you tell which HardDrive is the other??or even the format of it?? – Jun 01 '19 at 10:54
1 Answers
1
The common cause of a bus powered drive not operating is the computer isn’t getting enough power through the cable you are using to power the unit.
- USB external hard drive is mounted on one MacBook Pro but not another
- External hard drive not recognised by MacBook Pro.
- USB Hard drive has very small chance of being recognized by Macbook Pro each time it is connected, but works with other machines
Swapping cables or using a powered hub or getting a new enclosure can help triage and isolate why this happens in many cases. Also, looking for a long running fsckprocess I’m case the “good” mac is actually triggering an “unclean mount” type check. That often delays a device from mounting, but you should see it in diskutil immediately which doesn’t match your case here.
bmike
- 235,889